Name: HCP-EM(SCI)
Brand: Hochiki

Direct answer

Hochiki addressable call points use a modified polyphenylene oxide casing. The HCP-EM(SCI) marine call point shares the same housing material as the standard indoor HCP-E(SCI) and is rated IP24; the intrinsically safe CCP-E-IS is also modified polyphenylene oxide. The HCP-EM(SCI) is supplied with a non-frangible (resettable) element as standard, with a glass element available as an option. The MCP1A marine conventional call point is made from PC/ABS and is rated IP24D.

Applies to

Products / Models: HCP-E(SCI), HCP-EM(SCI) (1440380-13), CCP-E-IS, MCP1A
Firmware / Version: Not applicable
Region: Not applicable
Standards: BS EN 54-11

Changing the call point element

If you change a call point element from glass to non-frangible (flexi), confirm the operation by pressing the resettable element afterwards.

When to contact technical support

Contact Hochiki Europe technical support if you need to order a call point with a glass element instead of the standard non-frangible element, or to confirm the casing or element material for a call point model not listed here.

Safety note

This article is general guidance for Hochiki Europe products. Design, installation, commissioning, maintenance and modification of fire detection and alarm systems should be carried out by, or under the responsibility of, a competent person in accordance with the applicable standards (for example BS 5839-1 in the UK). Statutory requirements imposed by the relevant enforcing authority also apply. Always refer to the current product manual and data sheet for the exact model before carrying out any work.

References

Last reviewed: 2026-10-23 — Reviewed by: Hochiki Europe Technical Support

What are Hochiki call point casings and elements made from?

Hochiki HCP-E(SCI) and HCP-EM(SCI) call points have a modified polyphenylene oxide casing and a non-frangible element as standard, with a glass element available as an option.